Designing your serial to ethernet interface or serial device server has become history thanks to the EM100 10BaseT ethernet-to-serial module. The EM100 is highly integrated requiring only one external component - an RJ45 Ethernet connector. The EM100 has the lowest power consumption of all Ethernet Modules we offer. Economical pricing makes the EM100 an ideal choice for cost sensitive designs.
- Adds a 10 baseT port to your serial UART device
- One serial (TTL) port with full- or half-duplex operation*; baudrates of up to 115200bps; 5 parity modes (none, even, odd, mark, space); 7 or 8 data bits; optional RTS/CTS flow control
- Fully sealed design
- Serial Device Server for embedded applications
- Supports TCP/IP, UDP, ARP, ICMP, DHCP network protocols
- Four LED lines provide Module status information
- Two internal 510-byte routing buffers
- Onboard EEPROM stores numerous user-definable functioning parameters (Settings)
- Module setup can be performed through the serial port or network (over-the-network IP-address configuration is also supported)
- Internal firmware can be upgraded through the serial port or over the network
- Supplied with Device Server Toolkit (DST) for Windows, including Virtual Serial Port Driver (VSPD) (COM redirector)
- Very compact (46x28x13 mm)
- Bult-in Ethernet Magnetics
- Starter Kit availabe
data sheet
Quantity Prices (USD)
| Quantity |
1+ |
20+ |
50+ |
100+ |
| Price |
$54.75 |
$45.00 |
$42.25 |
$39.95 |