ZigBee RF Transceiver Module (EasyBee)

ZigBee RF Transceiver Module (EasyBee)

$49.00$56.00 USD

Quantity Discounts (Per Unit)

  • 20-49: Save $3.50 Each
  • 50-99: Save $7.00 Each
  • 100+: Save $9.05 Each
  • Description
  • Reviews (0)


EasyBee is an IEEE 802.15.4 compliant RF Zigbee transceiver. It enables designers to easily add ZigBee / IEEE 802.15.4 wireless capability to their products without the need for RF or antenna design expertise. The module contains all RF circuitry, including integral antenna and controller in a simple-to-use, plug-in or surface mount module. A 4-wire SPI port interfaces to a baseband microcontroller. The PHY (Physical) layer includes an impedance matched balun and integral antenna. Options include a shielding can or external antenna connector. The MAC (Media Access Control) layer includes CRC-16 generation, clear channel assessment, signal energy detection, security, encryption and authentication.

EasyBee is a fully-capable device and a ZigBee networking layer is not required for point-to-point communication. If ZigBee is required, compatible ZigBee stacks include Microchip Technology’s free ZigBee stack, and Figure-8’s ZigBee stack. This module is an application-ready solution for fast-to-market ZigBee and IEEE 802.15.4 communications, providing the development engineer unlimited choice of host controller and stack firmware provider.

  • 2.4GHz IEEE 802.15.4 / ZigBee RF module
  • Raw data rate 250kbps
  • FCC / CE compliance planned
  • Integral antenna
  • Based on ChipCon CC2420 RF controller
  • 4-wire SPI interface
  • Separate 128-byte Rx & Tx FIFO buffers
  • Integrates with your choice of micro e.g. PIC running Microchip stack or ATMEL running Figure-8 stack
  • Consumes just 20mA (Rx), 18mA (Tx)
  • 2.1Vdc – 3.6Vdc operation
  • Surface mount or through hole versions
  • Wide temperature range -40ºC to +85ºC
  • Small size: 1.72″ x 0.78″ x 0.13″

Data Sheet


There are no reviews yet.

Be the first to review “ZigBee RF Transceiver Module (EasyBee)”